Identification and Analysis of the MIR399 Gene Family in Grapevine Reveal Their Potential Functions in Abiotic Stress.

MiR399 plays an important role in plant growth and development. The objective of the present study was to elucidate the evolutionary characteristics of the MIR399 gene family in grapevine and investigate its role in stress response. To comprehensively investigate the functions of miR399 in grapevine, nine members of the Vvi-MIR399 family were identified based on the genome, using a miRBase database search, located on four chromosomes (Chr 2, Chr 10, Chr 15, and Chr 16). The lengths of the Vvi-miR399 precursor sequences ranged from 82 to 122 nt and they formed stable stem-loop structures, indicating that they could produce microRNAs (miRNAs). Furthermore, our results suggested that the 2 to 20 nt region of miR399 mature sequences were relatively conserved among family members. Phylogenetic analysis revealed that the Vvi-MIR399 members of dicots (Arabidopsis, tomato, and sweet orange) and monocots (rice and grapevine) could be divided into three clades, and most of the Vvi-MIR399s were closely related to sweet orange in dicots. Promoter analysis of Vvi-MIR399s showed that the majority of the predicted cis-elements were related to stress response. A total of 66.7% (6/9) of the Vvi-MIR399 promoters harbored drought, GA, and SA response elements, and 44.4% (4/9) of the Vvi-MIRR399 promoters also presented elements involved in ABA and MeJA response. The expression trend of Vvi-MIR399s was consistent in different tissues, with the lowest expression level in mature and young fruits and the highest expression level in stems and young leaves. However, nine Vvi-MIR399s and four target genes showed different expression patterns when exposed to low light, high light, heat, cold, drought, and salt stress. Interestingly, a putative target of Vvi-MIR399 targeted multiple genes; for example, seven Vvi-MIR399s simultaneously targeted VIT_213s0067g03280.1. Furthermore, overexpression of Vvi_MIR399e and Vvi_MIR399f in Arabidopsis enhanced tolerance to drought compared with wild-type (WT). In contrast, the survival rate of Vvi_MIR399d-overexpressed plants were zero after drought stress. In conclusion, Vvi-MIR399e and Vvi-MIR399f, which are related to drought tolerance in grapevine, provide candidate genes for future drought resistance breeding.

Recent Advances in Flexible Ultrasonic Transducers: From Materials Optimization to Imaging Applications.

Ultrasonic (US) transducers have been widely used in the field of ultrasonic and photoacoustic imaging system in recent years, to convert acoustic and electrical signals into each other. As the core part of imaging systems, US transducers have been extensively studied and achieved remarkable progress recently. Imaging systems employing conventional rigid US transducers impose certain constraints, such as not being able to conform to complex surfaces and comfortably come into contact with skin and the sample, and meet the applications of continuous monitoring and diagnosis. To overcome these drawbacks, significant effort has been made in transforming the rigid US transducers to become flexible and wearable. Flexible US transducers ensure self-alignment to complex surfaces and maximize the transferred US energy, resulting in high quality detection performance. The advancement in flexible US transducers has further extended the application range of imaging systems. This review is intended to summarize the most recent advances in flexible US transducers, including advanced functional materials optimization, representative US transducers designs and practical applications in imaging systems. Additionally, the potential challenges and future directions of the development of flexible US transducers are also discussed.

Cantilever-enhanced photoacoustic spectroscopy for gas sensing: A comparison of different displacement detection methods.

Photoacoustic spectroscopy (PAS) combines the advantages of high sensitivity, high specificity and zero background, which is very suitable for trace gas detection. Cantilever-enhanced photoacoustic spectroscopy (CEPAS) utilizes highly sensitive mechanical cantilevers to further enhance the photoacoustic signal and shows a gas concentration detection limit of parts per trillion. This review is intended to summarize the recent advancements in CEPAS based on different displacement detection methods, such as Michelson interference, Fabry-Perot interference, light intensity detection, capacitive, piezoelectric and piezoresistive detection. Fundamental mechanisms and technical requirements of CEPAS are also provided in the literature. Finally, potential challenges and further opportunities are also discussed.

Non-Invasive Monitoring of Human Health by Photoacoustic Spectroscopy.

For certain diseases, the continuous long-term monitoring of the physiological condition is crucial. Therefore, non-invasive monitoring methods have attracted widespread attention in health care. This review aims to discuss the non-invasive monitoring technologies for human health based on photoacoustic spectroscopy. First, the theoretical basis of photoacoustic spectroscopy and related devices are reported. Furthermore, this article introduces the monitoring methods for blood glucose, blood oxygen, lipid, and tumors, including differential continuous-wave photoacoustic spectroscopy, microscopic photoacoustic spectroscopy, mid-infrared photoacoustic detection, wavelength-modulated differential photoacoustic spectroscopy, and others. Finally, we present the limitations and prospects of photoacoustic spectroscopy.

Temperature-Insensitive Structure Design of Micromachined Resonant Accelerometers.

Micromachined resonant accelerometers (MRAs), especially those devices fabricated by silicon on glass technology, suffer from temperature drift error caused by inherent thermal stress. This paper proposes two structure designs to attenuate the effect of thermal stress. The first MRA structure is realized by optimizing the locations of the bonding anchors and utilizing a special-shaped substrate to isolate the thermal stress generated during the die attach process. The second structure is designed using an isolation frame fixed by a single anchor to replace all dispersed anchors associated with the suspension beams and micro-levers. Simulated and experimental results show that both of the MRA structures can effectively reduce the thermal stress effect. The experimental results on one MRA prototype indicate that the differential temperature sensitivity reduces down to 1.9 µg/°C and its 15-day bias stability reaches 1.4 µg.

Self-Locking Avoidance and Stiffness Compensation of a Three-Axis Micromachined Electrostatically Suspended Accelerometer.

A micromachined electrostatically-suspended accelerometer (MESA) is a kind of three-axis inertial sensor based on fully-contactless electrostatic suspension of the proof mass (PM). It has the potential to offer broad bandwidth, high sensitivity, wide dynamic range and, thus, would be perfectly suited for land seismic acquisition. Previous experiments showed that it is hard to lift up the PM successfully during initial levitation as the mass needs to be levitated simultaneously in all six degrees of freedom (DoFs). By analyzing the coupling electrostatic forces and torques between three lateral axes, it is found there exists a self-locking zone due to the cross-axis coupling effect. To minimize the cross-axis coupling and solve the initial levitation problem, this paper proposes an effective control scheme by delaying the operation of one lateral actuator. The experimental result demonstrates that the PM can be levitated up with six-DoF suspension operation at any initial position. We also propose a feed-forward compensation approach to minimize the negative stiffness effect inherent in electrostatic suspension. The experiment results demonstrate that a more broadband linear amplitude-frequency response and higher suspension stiffness can be achieved, which is crucial to maintain high vector fidelity for potential use as a three-component MEMS geophone. The preliminary performance tests of the three-axis linear accelerometer were conducted under normal atmospheric pressure and room temperature. The main results and noise analysis are presented. It is shown that vacuum packaging of the MEMS sensor is essential to extend the bandwidth and lower the noise floor, especially for low-noise seismic data acquisition.

Pantoea pleuroti sp. nov., Isolated from the Fruiting Bodies of Pleurotus eryngii.

Four Gram-negative-staining, facultatively anaerobic bacterial isolates were obtained from the fruiting bodies of the edible mushroom Pleurotus eryngii showing symptoms of bacterial blight disease in Beijing, China. Nearly complete 16S rRNA gene sequencing placed these isolates in the genus Pantoea. Multilocus sequence analysis based on the partial sequences of atpD, gyrB, infB and rpoB revealed Pantoea agglomerans as their closest phylogenetic relatives. DNA-DNA hybridization and phenotypic tests confirmed the classification of the new isolates as a novel species. The name Pantoea pleuroti sp. nov. [type strain KCTC 42084(T) = CGMCC 1.12894(T) = JZB 2120015(T)] is proposed.

Genetic diversity of Pleurotus pulmonarius revealed by RAPD, ISSR, and SRAP fingerprinting.

Pleurotus pulmonarius is one of the most widely cultivated and popular edible fungi in the genus Pleurotus. Three molecular markers were used to analyze the genetic diversity of 15 Chinese P. pulmonarius cultivars. In total, 21 random amplified polymorphic DNA (RAPD), 20 inter-simple sequence repeat (ISSR), and 20 sequence-related amplified polymorphism (SRAP) primers or primer pairs were selected for generating data based on their clear banding profiles produced. With the use of these RAPD, ISSR, and SRAP primers or primer pairs, a total of 361 RAPD, 283 ISSR, and 131 SRAP fragments were detected, of which 287 (79.5 %) RAPD, 211 (74.6 %) ISSR, and 98 (74.8 %) SRAP fragments were polymorphic. Unweighted Pair-Group Method with Arithmetic Mean (UPGMA) trees of these three methods were structured similarly, grouping the 15 tested strains into four clades. Subsequently, visual DNA fingerprinting and cluster analysis were performed to evaluate the resolving power of the combined RAPD, ISSR, and SRAP markers in the differentiation among these strains. The results of this study demonstrated that each method above could efficiently differentiate P. pulmonarius cultivars and could thus be considered an efficient tool for surveying genetic diversity of P. pulmonarius.

Evaluation of genetic diversity among Chinese Pleurotus eryngii cultivars by combined RAPD/ISSR marker.

Pleurotus eryngii (DC. Ex. Fr.) Quél is a rare precious edible fungus which belongs to the family Pleurotaceae. This mushroom has highly nutritional, pharmaceutical, economic and ecological values. In the present study, combined randomly amplified polymorphic DNA (RAPD)/inter-simple sequence repeat (ISSR) was used to assess the genetic diversity of P. eryngii strains cultivated in China. For the RAPD and ISSR analyses, 404 and 392 polymorphic bands were obtained from 32 P. eryngii strains using 28 and 24 selected primers, respectively. A combined RAPD/ISSR dendrogram grouped the 32 strains into five clades with coefficient of 0.770. The comparison of RAPD and ISSR was also elucidated in the present study. The results of our study obtained by combined RAPD/ISSR analysis contributed to a better understanding of the genetic relationships among the P. eryngii strains and provide orientation for the strain improvement of P. eryngii species.

Polyethylene glycol-mediated transformation of fused egfp-hph gene under the control of gpd promoter in Pleurotus eryngii.

Pleurotus eryngii was transformed using a polyethylene glycol-mediated method. A plasmid, pEPUGH, containing a reporter gene (enhanced green fluorescent protein gene, egfp) and a positive selectable marker gene (hygromycin phosphotransferase gene, hph) was constructed. The fused egfp-hph gene was placed under the control of the strong and constitutive native gpd promoter from P. eryngii. The recombinant plasmid was used to transform of P. eryngii protoplasts. Successful transformation was demonstrated by molecular analyses. Moreover, the mycelia of the transformants showed green epipolic dispersion on fluorescence microscopy. About 90-210 transformants were produced per µg plasmid DNA per 10(7) viable protoplasts.

Diversity of microorganisms isolated from the soil sample surround Chroogomphus rutilus in the Beijing region.

Artificially cultivating Chroogomphus rutilus is too inefficient to be commercially feasible. Furthermore, isolating C. rutilus mycelia in the wild is difficult. Thus, it is important to determine the natural habitat of its fruiting body. This study focused on the ecology of the C. rutilus habitat to isolate and classify beneficial microorganisms that could affect its growth, which could be used in future research on artificial cultivation. In total, 342 isolates were isolated from soil samples collected around a C. rutilus colony in the Beijing region. Of these, 22 bacterial and 14 fungal isolates were selected for sequencing and phylogenetic analysis, based on their growth characteristics and colony morphology. Using 16S rRNA gene sequence analysis, the bacterial isolates were divided into two monophyletic clusters which had significant hits to the genera Bacillus and Pseudomonas, respectively. Using internal transcribed spacer (ITS) sequence analysis, fungal isolates were divided into four monophyletic clusters: Penicillium, Trichoderma, Mortierella, and Bionectria. Moreover, the phylogenetic diversity of these isolates was analysed. The results indicated that numerous microorganisms were present in C. rutilus habitat. This was the first reported examination of the microbiological ecology of C. rutilus.